We use paint packaging cans imported from Germany, transport will be free for you to strengthen the packaging, to ensure that the product is transported to your hands is the most perfect state, and our packaging design is exquisite, excellent workmanship, the quality of the product itself is excellent, so the products are exported to dozens of countries and regions.

Aviation mark paint, suitable for all kinds of metal, concrete surface for marking use.

1. The coating has strong adhesion to the substrate, good hiding power, bright color, good light and color retention, and durable.

2. As the sealing primer of the chimney aviation sign, it completely solves the problem of alkali return of the concrete base surface, can be solidified into film on the wet concrete base surface, meets the construction requirements of the chimney edge turning over the mold edge, and greatly shortens the total construction period.

1. Polish and smooth the plates and ribs existing on the base surface, and remove the floating sand, hanging pulp, and floating soil on the concrete base surface.

2. If there is a honeycomb surface on the concrete surface, use construction glue and high grade cement to make putty, and repair the pit and sand hole on the base surface.

1. Special person must be assigned to be responsible for the preparation of the paint, strictly according to the requirements of the label A and B component ratio, and fully stirred by mechanical means, and the ripening process can be constructed after 30 minutes.

2. The configured coating should be used up within the active period (2-4h).

3. Adjustment of viscosity: During the active period, the coating will gradually thicken due to the role of curing agent, so it is necessary to add diluent in time and adjust the construction viscosity of the coating at any time (generally not more than 15% of the coating) to ensure the construction quality.

1. It is strictly prohibited to paint the base surface and the coating between the frost and fog in the case of construction, prohibit rain, snow, fog, wind weather construction.

2. Avoid inhaling solvent volatile gas and paint mist, eyes and skin should not contact this product. If eyes come into contact with this product, wash them immediately with plenty of water and send them to the doctor as soon as possible. If skin contact with this product, wash immediately with appropriate detergent, soap or water.

3. The construction site should be provided with adequate ventilation, away from all sparks and open flames.