- Overview
- Product Description
- Where to Use
- How to use
- Company Profile
- FAQ
Basic Info.
Certification
ISO14001, ISO9001
Substrate
Ceramic
Components
Solvent
Formation Mechanism
Conversion Type
Solvent Type
Water-Base
Resin Type
Acrylic Acid
Gloss
Matt(10~15% on a 60°meter)
Viscosity
95~105ku
Specific Gravity
Approximately 1.49kg/L
Maximum Voc Content
>50g/L
Solid Content (by Weight)
57.8%
Theoretical Coverage Per Coat
8-10m2 /Kg/Coat
Shelf Life
18 Months in Sealed Cans
Storage
Store in Cool, Dry and Good Ventilated Place. Temp
Transport Package
1L, 2L, 3L, 4L, 5L, 18L, 20L and 200L etc.
Specification
SGS
Trademark
Maydos
Origin
China
HS Code
32091000
Production Capacity
60000 PCS/Year
Product Description
Maydos Water Base Latex Paint
Technical Indexes
Notes for use:
| Appearance | White uniform viscous liquid |
| Gloss | Matt |
| Solids content | 56±2% |
| Specific gravity | 1.44±0.05 |
| Climate ageing | 400 hours no change |
| Contrast ratio | > 0.92 |
| Alkali resistance (48 h) | Coating no change |
| Viscosity | 99~105 Ku |
| Stability ( -5ºC) | No Degenerating |
| Water resistant property | 96 hours no change |
| Pigment | Non-lead pigment |
| Binder | Acrylic copolymer |
| Solvent | Water |
| Application method | Brush Roller Spray guns |
| Theoretical coverage | 8~10/ kg / coat |
| Mixing ration with water | 10% ~ 15% of water |
| Touch drying / Recoat time | 25 min/ 25ºC / At least 2 hours |
| Application environment | Humidity ≤85% , temperature ≥5ºC |
| Tools clean | Clean the tools with water |
| Storage | No cold place, sealed well |
| Packing | 5L=6kg 18L=22kg |
| Technical data of Product line | |||
| MODEL | 1900 | 2900 | 5900 |
| Gloss & Color | Matt , White and Colors | ||
| Viscosity | 99-105 KU | 95-105 KU | 95-105 KU |
| Solid Content | =50% | =62% | =53% |
| Density | 1.46-1.47 kg/L | 1.46-1.47 kg/L | 1.32-1.41 kg/L |
| Max VOC Content | 60g/L | 60g/L | 70g/L |
| Theoretical coverage per coat | 8-10m2/kg/coat | 8-10m2/kg/coat | 8-10m2/kg/coat |
| Recommended film thickness | Wet:80μm/Dry:30μm | Wet:80μm/Dry:35μm | Wet:80μm/Dry:43μm |
Uses:
For new or old exterior surface of brickwork, plaster, and concrete, etc.
For new or old exterior surface of brickwork, plaster, and concrete, etc.
Features:
1.Dirt resistance
2.Excellent alkali, fungus & algae resistance
3.Weathering resistance & color retention
4. Strong adhesion
Also suitable for interior wall
1.Dirt resistance
2.Excellent alkali, fungus & algae resistance
3.Weathering resistance & color retention
4. Strong adhesion
Suitable for the protection & decotation of house, hotel,office , school and etc
Also suitable for interior wall
Construction Condition
Temperature ≥ 10°C ; Humidity ≤ 85% ; Take Protection ; Not in Rain in 24h
Application Procedure
Step1.Treat Concrete Wall
Step2.Apply Putty (Two coats)
Step3.Apply Primer (One coat)
Step4.Apply Topcoat (Two coats)
Application Procedure
Step1.Treat Concrete Wall Step2.Apply Putty (Two coats)
Step3.Apply Primer (One coat)
Step4.Apply Topcoat (Two coats)
Typical Painting System
| SURFACE | SYSTEM |
| Normal, Sound Surface | Primer: Maydos Anti-alkali Primer W1210 (1 coat) Topcoat: Maydos Interior High-Class Emulsion Wall Paint AN3006 (2 coats) |
Surface Preparation
Surfaces must be thoroughly clean, dry and free from all loose dirt, chalk or powder. New surfaces such as plaster and concrete should be fully dry before painting.
Surfaces must be thoroughly clean, dry and free from all loose dirt, chalk or powder. New surfaces such as plaster and concrete should be fully dry before painting.
| New Wall | 1. Fresh concrete must cure at least 30 days and meet application requirement before plastering. 2. The plaster must not be too soft. Sand and dust off after dry. 3. To resist alkalis and to obtain best results first apply one coat of Maydos anti-alkali primer W1210 |
| Previously Painted Surface | 1. Remove powdery or flaking paint by scraping followed by using a suitable abrasive paper and dusting off. 2. Fill the defects with proper filler 3. To seal powdery surfaces and to obtain best results first apply one coat of Maydos anti-alkali primer W1210 |
| Fungus Growth Wall | 1. Remove all the fungus by scraping followed by using a suitable abrasive paper and dusting off 2. Wash the surface with appropriate fungus washing. Rinse with clean water and wait till dry 3. To obtain best results first apply one coat of Maydos anti-alkali primer W1210 |
Notes for use:
1.Mix well after paint can is opened.
2.To prevent hardening of the paint, the can should be closed during the interval of application. Thinned paint should not be poured back to the original can.
3.Recoat interval should be prolonged in winter. To prevent the surface from erosion and avoid the precipitation of alkaline component, wall surface drying time should be relative long
4.Stop application when temperature is below 10ºC, or humidity over 85%.
5. Apply with Maydos matching primer for best performance.
6. For information of Manufacture Date, Lot No., Net weight and Expiring Date, please refer to the product label.
1.ISO14025 Ecolabelling certificate, ISO9001, ISO14001 approved enterprise
2.Starts international business since 2005.
3.Exported over 30 countries in Europe, Asia, Africa, Oceania and America.
4.Sales revenues grow by 500% in 2007.
5.Part of China's top 5 chemical groups , Guangdong Maydos Group
6.Welcome OEM and ODM orders
1.ISO14025 Ecolabelling certificate, ISO9001, ISO14001 approved enterprise
2.Starts international business since 2005.
3.Exported over 30 countries in Europe, Asia, Africa, Oceania and America.
4.Sales revenues grow by 500% in 2007.
5.Part of China's top 5 chemical groups , Guangdong Maydos Group
6.Welcome OEM and ODM orders
1.How can you prove that you are a paint manufacturer rather than a trading company?
As the one of The Top 5 paint manufacturer in China.We have many years of experience since 1996 in production and export,welcome to visit our factory at any time.
2.How about the price ?
We can offer the best wholesale price which depend on the quantity of the order.
3.I need to make sure the quality and the color .
Our pleasure!We can offer the liquid Free sample for you to test and color chart.
4.If the product is not ideal, what can we do?
We have perfect after-sales service to help to complete the construction smoothly.
Even if there are any unexpected things in your order, we will assist to solve them.
5.What's your MOQ (min order quantity),production period and delivery time?
Our MOQ is 200Kg. We accept mixed order and the production period and delivery time are 7-10 days.
6.I want to put my Logo on the packing .
We can accept the OEM, waiting for your details requirement.